EEW SPC provides monopiles for Vattenfall’s Vesterhav project

Friday, 3 December, 2021 - 18:00

Rostock-based company EEW Special Pipe Constructions GmbH has received an order from the Swedish energy group Vattenfall to produce 41 monopiles for the 344 MW offshore wind
farms Vesterhav. The contract was signed on 19 November 2021.

Between April 2022 and August 2022, EEW SPC will process a total of around 25,500 tons of steel for the order. “We are delighted that, following on from the order for the Kriegers Flak project, we can now also produce the monopiles for the Vesterhav project. Even if the COVID numbers are currently rising sharply, we have managed to bring the contract negotiations to a successful conclusion through having online meetings. We would like to thank Vattenfall for the trust that they have placed in us and we look forward to working with them in a mutually good cooperation here too”, says Heiko Mützelburg, CEO of EEW SPC. The two wind farms are located off the coast of Denmark in the North Sea. Completion is planned for the end of 2023. After commissioning, Vesterhav project will supply up to 380,000 Danish households with environmentally friendly electricity each year.

For over 85 years the EEW Group has been known as a worldwide specialist for the production of steel pipe constructions and corresponding pipe components. The EEW Special Pipe Constructions GmbH, based in the Rostock Port, is a worldwide market leader subsidiary of the EEW Group and guarantees the successful manufacture of foundation structures for the offshore wind sector as well as piles for the offshore oil and gas industry. With innovative energy and the dedication of over 500 employees, EEW SPC creates innovative solutions for the sustainable energy sector.

Quelle: 

EEW Holding GmbH & Co. KG

Similar Entries

The first monopile for the Baltic Eagle offshore wind project is finished (pict. EEW SPC)

On 18 February 2022, the first monopile for the Baltic Eagle offshore wind farm was completed. The pile weighs 1,363 tonnes with a diameter of 9 metres. Baltic Eagle is already the second wind farm project of the Spanish energy company Iberdrola in the German Baltic Sea.

Medfloat Pilot Parc using SATH technology (pict. Saitec)

The Spanish engineering company Saitec has announced its interest in developing a pre-commercial pilot park with 5 units and a total potential of 50MW in the Mediterranean Sea in 2025. The offshore wind turbines will use SATH technology in open sea in Girona, specifically in an area located more 15 km from Cap de Creus on the Costa Brava (Catalonia)

The jacket, which will support the offshore platform substation, was secured on the seabed using the Saipem 7000 heavy lift vessel  (pict. SSE plc)

Construction of the world’s deepest fixed bottom offshore wind farm, which is also Scotland’s largest, has reached another milestone with the installation of a jacket in preparation for the project’s offshore substation topside which is due to be installed in early 2022.

Seagreen Osprey first turbine install (pict. Cadeler)

Cadeler A/S, a key supplier within the offshore wind industry, has signed a firm contract with Siemens Gamesa to provide the transportation and installation of a total of 60 Siemens Gamesa SG 14-222 DD offshore wind turbines (WTGs) for the Moray West offshore wind farm off the coast of Scotland. This will be the first time that these 14MW offshore wind turbines will be installed on a commercial scale.