Service for EnBW Baltic 2 to be provided from Danish port of Klintholm

Tuesday, 21 April, 2020 - 18:15
EnBW Offshore Windpark Baltic 2 (pict. EnBW)
EnBW Offshore Windpark Baltic 2 (pict. EnBW)

One of Germany’s largest offshore wind farms in the Baltic Sea, EnBW Baltic 2, is to be serviced from August 2020 from the Danish port of Klintholm on the island of Møn. Until now, the company’s service team – up to 25 in number – have travelled from Rostock to a hotel vessel close to the wind farm. A hotel and a service building are now being constructed in Klintholm, from where the employees will be ferried to the wind farm in the mornings and evenings during their two-week duty roster. “The proximity to our wind farms offers us unique opportunities here,” said Kent Hougaard of EnBW Offshore Services Danmark (EOS). The 80 Siemens SWT-3.6-120 wind turbines have been supplying some 340,000 households with renewable electricity since 2015. Located in German territorial waters with depths ranging from 23 to 44 metres, the wind farm is about 40 km east of Møns Klint, close to the meeting point of the Danish, Swedish and German maritime borders. Klintholm in Denmark is nevertheless better situated for servicing the turbines than any German port. EnBW, their operator, will consequently be relocating a large part of its operating team from Rostock to Møn. “We expect noticeable savings and synergies as the journey from Klintholm harbour only takes just over an hour,” explained Kent Hougaard. Baltic 2 continues to be controlled, however, by remote data link from the control room in Barhöft, Mecklenburg. For most offshore wind farms, service teams are flown in by helicopter either on a daily basis or for two-week stays on a hotel vessel. “With a trip time of only just over an hour, accommodation on land is far more cost-effective,” explains Kent Hougaard. Klintholm is consequently ideal as a service hub for wind farms in this part of the Baltic Sea. The German technicians continue to be ferried from Rostock for their two-week tours of duty. From August, however, rather than disembarking onto a hotel vessel, they will be brought to the idyllic Klintholm on the Danish island of Møn. They will commute from the port on Sun Light and Moon Light, two crew transfer vessels (CTVs) chartered from a Dutch shipping company.

The hotel to accommodate the service team is scheduled to open in August. The service building in the port area is scheduled for completion as early as July, when the first spare parts will be taken into storage there. Both buildings are rented out under contract for at least ten years, thus ensuring a long-term commitment.

Quelle: 

EnBW Energie Baden-Württemberg AG

Similar Entries

Windea Offshore, together with its partner WP Systems, has taken another step towards establishing the WINDEA Blade Service concept. Last week the operation of the working platform System terra was successfully demonstrated at a Siemens SWT-3.6 offshore test turbine in the German district of Nordfriesland.

Loadout of the two monopiles and transition pieces at EEW SPC quay in Rostock

EEW Special Pipe Constructions GmbH, a member of the EEW Group, has announced the successful fabrication of two heavy monopile foundations and two transition pieces for the Coastal Virginia Offshore Wind (CVOW) demonstration project.

(pict. Salt Ship Design)

Edda Wind, the offshore wind segment of the Østensjø Group, has signed long term time charter
agreements with MHI Vestas and Ocean Breeze Energy respectively for two of the four offshore
wind vessels ordered from Spanish yards.

Sleipnir during LNG Bunkering (pict. Heerema Marine Contractors (HMC))

This week, Heerema’s newest vessel Sleipnir will begin her maiden voyage. Sleipnir, the world’s largest and strongest semi-submersible crane vessel (SSCV) was built in Singapore and will set course for Spain. The trip will take about 45 days.